WELCOME TO SUMIRUBBER
EN Guide
- Food

EN420:2003 - General Requirement

The user can consult the instruction for use.

EN388:2003 - Mechanical Protection

abcd
Test Performance Levels
1 2 3 4 5
 a) Abrasion resistance (cycle) >100 >500 >2000 >8000 -
 b) Blade cut resistance (index) >1.2 >2.5 >5 >10.0 >20.0
 c) Tear resistance (Newton) >10 >25 >50 >75 -
 d) Puncture resistance (Newton) >20 >60 >100 >150 -
EN374:2003 Chemical Protection and/or Micro-Organisms
EN374-1 (terminology and performance requirement)
EN374-1:2003 Chemical Protection (Simple Chemical)
EN374-1:2003 Chemical Protection (Specific Chemical)

EN374:2003 - Micro-Organisms Resistance Glove

Assess by: Air leakage test or water filling test

AQL ≥ 2               AQL Level  
 
1 2 3
4.0 1.5 0.65
EN374-1:2003 - Chemical Protection (Simple Chemical)

Assess by: Water leak test

Water proof but not passing the level required for High Risk Chemical Protective Glove.

EN374-1:2003 - Chemical Protection (Specific Chemical)

abcd

Assess by: Chemical permeation test

Breakthrough times more then 30mins (levels 2) for a minimum of 3 specific chemical listed below and water proof. Therefore the letter code of the chemicals can be more than 3 letters and up to 12.

Code
 Chemical
a  Methanol
b  Acetone
c  Acetonitrile
d  Dichloromethane
e  Corbon disulpide
f  Toluene
g  Diethylamine
h  Tetrahydrofurane
i  Ethyl acetate
j  n-Heptate
k  Sodium hydroxide 40%
l  Sulphuric acid 96%
EN511:2006 - Cold Protection

abc
Test Performance Levels
0 1 2 3 4
 a) Resistance to convective cold i<0.1 0.1<i<0.15 0.15<i<0.2 0.22<i<0.3 0.3<i
 b) Resistance to contact cold R<0.025 0.025<R<0.05 0.05<R<0.1 0.1<R<0.15 0.15<R
 c) Permeability to water Fail Pass      

(* Fail: water penetrated after 30min; Pass: no water penetrated after 30min)

EN407:2004 - Heat Protection

abcdef
Test Performance Levels
1 2 3 4
 a) Burning behavior - after burn (Times sec) ≤20 ≤10 ≤3 ≤2
                              - after glow (Times sec) N/R ≤120 ≤25 ≤5
 b) Contact heat (temp in °C  after 15sec) 100 250 350 500
 c) Convective heat (heat transfer delay sec) ≤4 ≤7 ≤10 ≤18
 d) Radiant heat (heat transfer delay sec) ≤7 ≤20 ≤50 ≤95
 e) Small splashes of molten metal (drop) ≥ 10 ≥15 ≥25 ≥35
 f) Large splashes of molten metal (g) 30 30 60 120 200

(* N/R- not require)

EN60903 - Electric Risk Protection

XY

Selection reference:

Class
(X)
Tested at Voltage: Approved for work under voltage:
00 2500 ≥500
0 5000 ≥1000
1 10000 ≥7000
2 20000 ≥17000
3 30000 ≥26500
4 40000 ≥36000
 Category
(Y)
 
Addition Requirement
A Acid resistance
H Oil resistance
Z Ozone resistance
M Resistance against high mechanical strain
R
 
Resistance against acid, oil, ozone
and high mechanical strain
C Resistance against extreme cold
EN12477:2001 - Protection gloves for welder

abcd      abcdef

Combination from testing of EN407 And EN388
Type A glove - higher protection against heat
Type B glove - lower protection against heat but are more flexible and pliable